Digital twin for factory layout planning Move the line on screen first.Then move it once.

We scan your brownfield hall as it stands today, turn every machine into a movable object and test new layouts with you in a browser. You see what fits, what clashes and what blocks a route before anyone unbolts anything.

Built for those who decide where the machines go

plant managersproduction engineersindustrial engineerslogistics planners
Variant B. Press 04 moves next to the CNC line.
PRESS 04, new position3.9 x 2.1 m PRESS 04, today aisle 0.9 m, forklift needs 1.8 m DOCK ADOCK B CNC 01CNC 02CNC 03paint boothassemblypackingstoragetooling
Variant B, aisle too narrow

The press fits. The forklift aisle drops to 0.9 m. The twin flags it before the move, not after.

See how it works

Illustration of a layout variant. Your twin is built from a scan of your own hall.

The problem

The drawing is ten years old.
The hall is not.

Every machine added, every pipe rerouted and every rack squeezed in has made the drawing less true. Researchers who work on factory digitalisation put it plainly: in brownfield planning, existing data are often outdated and incomplete, especially for older plants that were mostly planned in 2D (Petschnigg et al., 2021). So the new layout is planned on paper and tested on the shop floor.

Planning on a drawingPlanning in the twin
The drawing shows the hall as it was designedThe scan shows the hall as it stands today
Someone measures by hand between shiftsEvery distance is already in the scan
A clash with a column or a pipe shows up on delivery dayThe clash shows up on screen, weeks earlier
One layout gets built, because testing more costs too muchThree variants compared side by side
People imagine the result from a 2D planOperators walk through the new layout before it exists
Aisles and escape routes are checked after the moveAisles and escape routes are checked in every variant
What you get

Your hall, with machines
you can move.

A digital twin for factory layout planning is a 3D copy of a real hall, made from a laser scan, in which machines and racks are separate objects that can be moved. You test a new layout on screen, see what fits, what collides and what blocks a route, and only then move the real equipment.

01 / The hall as it stands today

Scanned in a day, measured once.

We walk the site with a handheld laser scanner while the hall works. The result is an as-built model of the hall: every later change is in it, and every distance is already measured.

Machines and racksEach one a separate object with its dimensions and position.
Fixed structureColumns, walls, cranes and pipes that cannot move.
Aisles and transport pathsForklift, pedestrian and escape routes with their widths.
Visible utilitiesPower, air and extraction points you can see in the hall.

You confirm the machine list and mark what can and cannot move before we build any variant.

02 / Variants

Three layouts, tested before the first bolt comes out.

In working sessions with your engineers we rearrange the hall on screen. Each variant is saved, so you can compare them side by side and walk through each one.

Move

Move and rotate

Existing machines and racks go to a new position, with their service clearances.measured from your scan
Add

Add new equipment

A machine you have not bought yet is placed from the supplier's model or its datasheet dimensions.before the purchase order
Check

Clash check

The twin flags clashes with fixed structure and aisles that become too narrow.in every variant

The pilot includes three layout variants and up to 20 movable objects.

03 / What you learn

A comparison you can take to the board.

You get a written report that compares the variants with numbers you can check yourself: clashes found, aisle widths, length of transport paths and floor area freed, plus what we recommend. Walkthrough recordings show each variant to people who were not in the sessions.

Fit and clearancesSpace around each machine for operation and service.
Clash detectionClashes with columns, cranes, pipes and other machines.
Transport pathsAisle widths for forklifts and people, longer or shorter routes, escape routes kept clear.
Variant comparisonThree layouts side by side, measured the same way, with a recommendation.
04 / How a machine is shown

From the scan where it is enough. From a model where it is not.

A scanner records only what it can see. A machine that stood against a wall has no back in the scan. So each object is shown in the way that gives the most reliable picture, and the twin says which one it is.

Scan

Cut-out from the scan

The machine looks exactly as it does in your hall. Best when it was scanned from all sides.most realistic
Model

Supplier's 3D model

Clean geometry with exact dimensions. Best when you have the model from the manufacturer.most precise
Volume

Simple volume

A box with the real dimensions and clearances. Enough to answer whether it fits.fastest
The pilot

One hall. Three layouts. Fixed price.

The pilot is a service, not software: no licence to buy and no tool for your team to learn. It has a fixed scope, so you know what you get and what it costs before we start.

  • A twin of one hall up to 2,000 m², opened in a browser
  • Up to 20 machines or racks as movable objects
  • Three layout variants built with your engineers
  • A written report comparing the variants
  • Walkthrough recordings of each variant
  • An inventory of machines with dimensions and positions
  • One live session with your team
  • The point cloud and scan files, yours to keep
Read the answers to common questions
Pilot
Quoted after a scoping call
Site
one hall, up to 2,000 m²
Movable objects
up to 20
Time on site
one day
Delivery
four weeks from scan day
Access to the twin
three months
Book a scoping call Net price, agreed in writing before the scan. Larger sites are quoted after the pilot.
How it works

From the first call
to a layout you trust.

01 / Call

We agree the question.

45 minutes online. You describe the change you are planning and what must not move. We set the scope and the scan day.

02 / Scan day

One day on site.

We walk the hall with a laser scanner and go around every machine from all the sides we can reach.

03 / Object list

You confirm the machines.

We separate machines and racks from the hall and send you the list with dimensions. You mark what can move and what cannot.

04 / Variants

We build three layouts with you.

In working sessions with your engineers we move, rotate and add equipment, and check each variant for fit, clearances and routes.

05 / Handover

Report and a live session.

You get the comparison report, walkthrough recordings, the machine inventory and the scan files. We present the variants to your team.

Ready for questions from
your security officer.

The scan is yoursYou get the files and decide who else sees them
Named access onlyThe twin opens only for the people you list
No use without consentNothing from your site appears in our marketing unless you agree in writing
Frequently asked questions

Before you book the call.

Book a scoping call

Last updated: 14 November 2026

What is a digital twin for factory layout planning?

It is an as-built 3D copy of your real hall, made from a laser scan, in which machines, racks and other equipment are separate objects that can be moved. You test a new layout on screen, see what fits, what collides and what blocks a route, and only then move the real equipment.

How accurate is it?

Dimensions come from a laser scan of the hall as it stands today, so they reflect reality better than old drawings. The report states the tolerance we measured for your scan. Anything critical, such as an anchor point or a tight clearance, should be re-measured on site before the move.

Do we have to stop production for the scan?

No. The scan is done on foot with a handheld laser scanner while the hall is working. A hall of up to 2,000 m² takes one day on site. If you have a planned stoppage, scanning then gives a cleaner result.

How do the machines become movable?

We separate each machine from the scan and treat the rest, such as walls, floor, columns and fixed installations, as an empty hall. A machine is shown as its cut-out from the scan, as the supplier's 3D model if you have one, or as a simple volume with real dimensions.

What about the side of a machine the scanner could not see?

A scanner records only what is visible. Where a machine stood against a wall or another machine, the hidden side is missing from the scan. In those cases we use the supplier's model or a simple volume, and we mark it in the twin.

Can we add machines we have not bought yet?

Yes. We place them from the supplier's 3D model, or as a volume with the dimensions and service clearances from the datasheet.

Can our engineers move things themselves?

In the pilot we build the variants together with your engineers in working sessions, and everyone can open and walk through each variant in a browser. Editing by your own team is something we agree after the pilot.

Does it simulate throughput or material flow?

No. The twin answers spatial questions: fit, clearances, collisions, aisles and routes. It does not calculate cycle times or throughput. It works alongside your process simulation, not instead of it.

We already have CAD or BIM of the hall. Why scan?

Drawings show the hall as designed. A scan shows it as it is today, with every later change, pipe and cable tray. If you have CAD or BIM, we use it together with the scan.

Can we use the result in our CAD or factory planning software?

You receive the point cloud in an open format such as E57 or LAS, which common CAD and factory planning tools can load, and the machine inventory with dimensions and positions as a spreadsheet. If you need the variants in a specific format, we agree it in the scoping call.

Who owns the scan and is it kept safe?

You own it and receive the files in an open format. We use the scan only to deliver the service, limit access to the people you name and delete our copies on request. Using any image of your site in our marketing needs your separate written consent.

How long does it take and how much does it cost?

The pilot covers one hall of up to 2,000 m², up to 20 movable objects and three layout variants. It takes four weeks from the scan day and has a fixed price, agreed before we start.

How do we justify the cost internally?

You know what a second move or a day of standstill costs in your plant, so we do not guess that number for you. The pilot gives you what you can set against it: the clashes found before the move and three variants measured the same way, for a fixed price agreed up front.

What do we need to prepare?

A list of machines, the changes you are considering, and the things that cannot move, such as foundations, cranes or main utilities. Supplier models and datasheets help if you have them.

Find the clash on screen,
not on the shop floor.

The scoping call takes 45 minutes. You leave with a scope, a date and a fixed price.

Book a scoping call
About Xentim

Better, safer places,
decided in 3D first.

Our mission

To make the places people work in safer and better designed, by letting them test a decision in 3D before it becomes real.

Our vision

Cameras already watch every site from many angles. The next step is a layer of intelligence above them: one that alerts a person only where a person is needed, analyses what it sees in depth and helps run the site and its resources wisely.

Xentim grew out of 3D. In a virtual world you can explore a possibility again and again, in any direction, as many times as you like. Years of building such worlds taught us to look at the real one the same way: to observe it closely, analyse it and draw conclusions.

That habit led us to digital twins. A copy of a real place lets you ask what would happen before anyone is at risk and before anything is moved. It became our fuel: environments that are better and safer for people, shaped by wiser design decisions.

The same thinking drives our work with cameras. Sites keep adding devices that watch from several angles and several sources. We believe what they need next is intelligence: alerts a person actually wants, in the moments a person should be alerted, and deeper analysis that draws conclusions from what the cameras see. It builds profiles of people, vehicles, animals, objects and machines, keeps an inventory of what is on site, and supports decisions about access and about how a site and its resources are managed.

Your data stays yoursFootage is analysed on your premises. Scans are your property. Nothing is used without your consent.
Profiles, not just detectionsPeople, vehicles, animals, objects and machines each get a profile: what it is, where it was and what it did.
Tested on ourselves firstWe run everything on our own cameras and scenes before we show it to a customer.
Plain about limitsWhere it will not pay off, or where a tool is not a certified analysis, we say so.
The team

A team that builds real places in 3D.

Who we are

Xentim is a team from Poznan, Poland, that builds AI video analytics for CCTV and produces synthetic 3D scenes for training detection models. Turning a real site into something a computer can understand is our daily work.

What this is not

The twin answers spatial questions. It does not replace structural or electrical design, and it does not calculate throughput. It works alongside your engineering and process simulation.

Book a scoping call

Pick a slot. 45 minutes online, about your hall and the change you are planning.

Prefer to write? contact@xentim.com