Digital twin for emergency drills Rehearse fire, flood and intrusion.Without stopping the line.

We scan your hall, build its digital twin and run the emergencies a live drill cannot stage. Fire wardens and shift teams watch smoke spread, routes close and people reach the assembly point, then repeat it until the plan holds.

Built for those who answer for people's safety in a working hall

EHS and HSE managersplant managerswarehouse operationssite security
Fire by the packing line. Minute three.
EXIT AEXIT BEXIT C blocked by smoke fire origin, packing lineCAM 01CAM 03CAM 02 officesstorageloading
Scenario, fire, exit C lost

Smoke has closed the nearest exit. The twin shows where people go instead and how long it takes them.

See how it works

Illustration of a scenario view. Your twin is built from a scan of your own hall.

The problem

A live drill tests the walk.
Not the fire. Not the night shift.

On drill day the routes are clear, the day shift is in and everyone knows it is coming. A real emergency picks a route blocked by stock, a night shift and a contractor nobody counted.

A live evacuation drillA drill in the twin
Production stops while everyone walks outThe line keeps running while your team rehearses
The day shift is drilled, the night shift is notEvery shift and every contractor, in their own time
Routes are clear and exits open on the dayYou block a route with stock or close an exit and see where people go
Nobody sees smoke, heat or waterSmoke fills the hall and closes routes the way it would
You record the time to the assembly pointYou see where the headcount breaks: bottlenecks and areas cleared last
Findings wait for the next drillYou change the plan and run it again the same day
What you get

Your hall, where emergencies
can happen safely.

A digital twin for emergency drills is an interactive 3D copy of a real building, made from a laser scan, in which fire, flooding or an intruder are simulated. People open it in a browser, watch how the event develops and how staff get out, and repeat it under different conditions. It sits between a tabletop exercise and a live evacuation drill.

01 / Your building, as it stands today

Scanned in a day, while the hall works.

We walk the site with a handheld laser scanner. The twin shows the hall the way it really is: machines, racks and stock where they stand now, not where a drawing from years ago says they are.

Exits and escape routesEvery fire exit, escape route and assembly point, with distances.
DoorsMarked and made interactive: open, closed or locked.
Fire equipmentExtinguishers, hydrants, alarm buttons, detectors, sprinklers.
CamerasPosition and field of view of each one, with blind spots.

You confirm this list against your evacuation plan and fire risk assessment before any scenario runs.

02 / Scenarios

Three events you cannot stage. Replayed as often as you want.

Each scenario starts where you choose and runs through the scanned geometry of your hall. Change one condition, such as a closed exit or an open door, and run it again to see what changes.

Fire

Fire and smoke

Smoke rises, gathers under the roof and closes routes. You see which exits are lost first.start point of your choice
Water

Flooding

Water spreads across the floor, flows through doors and reaches stock and equipment.burst pipe or heavy rain
Intruder

Armed intruder

People react, run or hide. You see which routes and rooms keep them out of sight.entry point of your choice

The pilot includes two of the three scenarios.

03 / What you learn

A report you can act on, not a recording to admire.

For each scenario you get a short written report, in the form of an after-action review: how long people needed to reach the assembly point, where they queued, which areas were cleared last, what your cameras would and would not have shown, and what we recommend changing.

Time to assembly pointPer scenario and per changed condition.
BottlenecksDoors and escape routes where people queue.
Blind spotsPlaces no camera covers during the event.
RecommendationsConcrete changes to routes, signage or equipment.
04 / Who builds it

We already simulate fire, falls and fights for AI.

Xentim produces synthetic CCTV footage that teaches detection models to recognise dangerous events: 89 fire and smoke clips, plus 1,045 fight events and 1,009 falls filmed from 12 cameras each. The twin puts the same kind of events inside your own building.

Fire and smoke. Synthetic CCTV footage from a Xentim dataset.
Violence. Synthetic CCTV footage from a Xentim dataset.

These clips come from our datasets, not from a customer twin. No real people appear in them.

The pilot

One hall. Fixed price. Four weeks.

The pilot is a service, not software: no licence to buy and no tool for your team to learn. It has a fixed scope, so you know what you get and what it costs before we start.

  • A twin of one hall or floor up to 2,000 m², opened in a browser
  • Two scenarios of your choice: fire, flooding or armed intruder
  • An after-action report for each scenario
  • Video recordings for staff training
  • An inventory of exits, doors, fire equipment and cameras
  • One live session with your team
  • The scan files, yours to keep
Read the answers to common questions
Pilot
Quoted after a scoping call
Site
one hall or floor, up to 2,000 m²
Time on site
one day
Delivery
four weeks from scan day
Access to the twin
three months
Book a scoping call Net price, agreed in writing before the scan. Larger sites are quoted after the pilot.
How it works

From the first call
to a rehearsed plan.

01 / Call

We agree the scope.

45 minutes online. You tell us about the hall and what worries you most. We choose the two scenarios and set the scan day.

02 / Scan day

One day on site.

We walk the hall with a laser scanner while it works. Doors, exits, fire equipment and cameras get a closer pass.

03 / Site map

You confirm what we found.

We mark fire exits, escape routes, doors, fire equipment and cameras in the twin. You check the list against your evacuation plan.

04 / Scenarios

We run the events.

Fire, flooding or an intruder start where you choose. We replay each one with changed conditions and record the results.

05 / Handover

Report and a live session.

You get the report, the recordings and the scan files. We walk your team through the twin in one live session.

Ready for questions from
your security officer.

The scan is yoursYou get the files and decide who else sees them
Named access onlyThe twin opens only for the people you list
No use without consentNothing from your site appears in our marketing unless you agree in writing
Frequently asked questions

Before you book the call.

Book a scoping call

Last updated: 14 November 2026

What is a digital twin for emergency drills?

It is an interactive 3D copy of your real building, made from a laser scan, in which emergencies are simulated: fire and smoke, flooding, an armed intruder. Your team opens it in a browser, watches how the event develops and how people get out, and repeats it under different conditions.

Does it replace a legally required evacuation drill or a fire engineering report?

No. It is a training and planning tool. It does not replace the evacuation drills required by law or a certified fire engineering analysis. It sits between a tabletop exercise and a live drill: more realistic than a discussion around a table, and able to show what a live drill cannot, such as smoke filling the hall or a route blocked by stock.

Can the night shift and contractors use it?

Yes. The twin opens in a browser, so every shift can go through the scenarios in its own time, and new staff and contractors can walk the escape routes before their first day on the floor.

Do we have to stop production for the scan?

No. The scan is done on foot with a handheld laser scanner while the hall is working. We agree a quiet window with you so that as few people as possible are in the frame. A hall of up to 2,000 m² takes one day on site.

Which scenarios can we run?

The pilot includes two of three: fire with smoke, flooding, armed intruder. Each one can be started in a different place and replayed with changed conditions, for example an exit closed or a door left open.

How realistic is the simulation?

Smoke, fire and water move through the scanned geometry of your hall, and simulated people react and head for the exits. The level is right for training and planning. It is not an engineering-grade calculation, and the report says so clearly.

What do we get at the end?

A link to the twin that opens in a browser, an after-action report for each scenario with time to the assembly point, bottlenecks, camera blind spots and recommendations, video recordings for training, an inventory of exits, doors, fire equipment and cameras, and the scan files themselves.

Who owns the scan?

You do. You receive the scan files in an open format and can use them for anything else. We use the scan only to deliver the service. Using any image of your site in our marketing needs your separate written consent.

Is the scan of our site kept safe?

A scan shows your layout, cameras and safeguards, so we treat it as confidential. Access to the twin is limited to the people you name, and we delete our copies on request when the project ends.

We already have a BIM model. Can you use it?

Yes. A BIM model adds what a scan cannot show: fire zones, wall ratings and installations inside walls. The scan adds what the model does not know: where machines and stock really stand today.

Do we need Xentim cameras or the Xentim device?

No. The twin works on its own. If you do have CCTV, we mark your cameras in the twin so you can see what each one would show during the event and where the blind spots are.

How long does it take and how much does it cost?

The pilot covers one hall or floor of up to 2,000 m² and takes four weeks from the scan day. It has a fixed price, agreed before we start. Larger sites and extra scenarios are quoted after the pilot.

How do we justify the cost internally?

A live drill gives you one number: the time to the assembly point. The pilot gives you two scenarios, each replayed under changed conditions, every shift able to rehearse without stopping the line, and an after-action report you can show to management, your insurer or an auditor.

What do we need to prepare?

A contact person on site, access to the hall for one day, and your evacuation plan if you have one. The plan helps us check that every exit and piece of equipment is in the twin.

Test the plan
before the day you need it.

The scoping call takes 45 minutes. You leave with a scope, a date and a fixed price.

Book a scoping call
About Xentim

Better, safer places,
decided in 3D first.

Our mission

To make the places people work in safer and better designed, by letting them test a decision in 3D before it becomes real.

Our vision

Cameras already watch every site from many angles. The next step is a layer of intelligence above them: one that alerts a person only where a person is needed, analyses what it sees in depth and helps run the site and its resources wisely.

Xentim grew out of 3D. In a virtual world you can explore a possibility again and again, in any direction, as many times as you like. Years of building such worlds taught us to look at the real one the same way: to observe it closely, analyse it and draw conclusions.

That habit led us to digital twins. A copy of a real place lets you ask what would happen before anyone is at risk and before anything is moved. It became our fuel: environments that are better and safer for people, shaped by wiser design decisions.

The same thinking drives our work with cameras. Sites keep adding devices that watch from several angles and several sources. We believe what they need next is intelligence: alerts a person actually wants, in the moments a person should be alerted, and deeper analysis that draws conclusions from what the cameras see. It builds profiles of people, vehicles, animals, objects and machines, keeps an inventory of what is on site, and supports decisions about access and about how a site and its resources are managed.

Your data stays yoursFootage is analysed on your premises. Scans are your property. Nothing is used without your consent.
Profiles, not just detectionsPeople, vehicles, animals, objects and machines each get a profile: what it is, where it was and what it did.
Tested on ourselves firstWe run everything on our own cameras and scenes before we show it to a customer.
Plain about limitsWhere it will not pay off, or where a tool is not a certified analysis, we say so.
The team

A team that works with dangerous events every day.

Who we are

Xentim is a team from Poznan, Poland, that builds AI video analytics for CCTV and produces synthetic footage of fires, falls and fights for training detection models. Simulating events that must not happen for real is our daily work.

What this is not

The twin is a training and planning tool. It does not replace the evacuation drills required by law or a certified fire engineering analysis.

Book a scoping call

Pick a slot. 45 minutes online, about your hall and your scenarios.

Prefer to write? contact@xentim.com