Xentim Book a demo
Comparison

In-camera analytics or Xentim: what each one does

In-camera analytics watches a simple rule on one camera: motion, a line crossing, entering a zone. Xentim describes every object from all cameras at once and lets you search recordings with a sentence. Both make sense, for different jobs.

Piotr BuczkowskiPiotr Buczkowskifounder of Xentim·
CriterionIn-camera analyticsXentim
Where it runsOn the camera itselfOn a device in your network, on the video from the cameras and recorder you already have
What it detectsUsually motion, a line crossing and entering a zone. Newer models tell a person from a vehiclePeople, vehicles and other objects with a description: type, colour, time of entering the frame, path, dwell time
How many cameras at onceEach camera separatelyAll cameras in one place
Searching after an eventUsually by time and by events from rules set up in advanceWith a plain sentence, also about something no rule anticipated
Replacing hardwareYou need a camera with that featureNo. It works with IP cameras and recorders that share video on the local network
Recordings and cloudDepends on the manufacturerAnalysis runs locally, recordings never leave the site
ReportingA list of rule eventsLive alerts and a daily report

We do not compare against specific camera brands, because capabilities depend on the model and firmware. The “In-camera analytics” column describes the typical scope of such a feature. Check the data sheet of your model.

When in-camera analytics is enough

When you have one or a few cameras, need a simple rule (a line, a zone, motion at night) and do not search recordings for events later. You do not need an extra device then.

When Xentim is the better fit

You can use both at once

Xentim does not require turning off the analytics in the camera. The camera can keep watching its simple rules while Xentim adds object descriptions and sentence search. More on the technology itself: What is AI video analytics for CCTV.

Questions and answers

Does Xentim replace in-camera analytics?

It does not have to. Xentim takes the video from the camera or the recorder, so the rules set up in the camera can keep working unchanged.

Do I need to buy new cameras for Xentim?

No. Xentim works with IP cameras and recorders that make their video available on the local network, most often as an RTSP stream. The camera brand does not matter.

When is in-camera analytics enough?

When you need a simple rule on a single camera, such as a line crossing or entering a zone, and you do not need to search recordings for events later.

How is Xentim different from the analytics built into cameras?

In-camera analytics detects motion or a line crossing on a single camera. Xentim describes every object (type, colour, path, time in frame) from all cameras at once and lets you search recordings with a sentence. You do not need to replace your cameras with newer ones.

See it on your own footage

The demo takes up to an hour and runs on material from your cameras.

Book a demo
Read next
What is AI video analytics for CCTVThe case was dropped because no one had time to watch the footageNight shift, two people, forty camerasWho is behind Xentim